Desktop SoftwareJust In

GSi Soundware Release GSi SMPTE Tool – A FREE Download

GSi Soundware have released GSi SMPTE Tool, a plugin aimed at those still using tape to record music, available as a FREE download.

GSi SMPTE Tool is a utility that can generate or decode the LTC SMPTE signal and translate it to MTC. Confused? First, let’s have a look at all these acronyms:

  • SMPTE: Society of Motion Picture and Television Experts, an entity in the US that creates standards about technologies in the audio and video industry;
  • LTC: Linear (or Longitudinal) Time Code, a method of creating a synchronization signal that can be transferred between different devices;
  • MTC: Midi Time Code, a part of the MIDI standard that relates to time code synchronization between MIDI units.

This seems very old stuff, and partially it is, but surprisingly enough, the SMPTE LTC is still much used today because it’s the easiest method to synchronize units from different manufacturers that don’t share a more modern sync method. The advantage of the SMPTE LTC signal is that it works under audio bandwidth, i.e. it’s a sound that you can actually hear (nasty as hell, similar to a Fax machine or an old modem), and transfer through audio cables, or record on any kind of audio recorders, either analog or digital, and manipulate as you wish.

In this case, the SMPTE Tool can generate the LTC signal or can decode it in order to translate it back to MIDI TIME CODE information that can be used to synchronize a MIDI sequencer (or D.A.W – Digital Audio Workstation, as we call them today) to a tape recorder. This system can also be of kind “one to many”, i.e. there can be one LTC source and many destination (in old lexicon it would be one master and multiple slaves), so for example, other than synchronizing a DAW to a tape machine, one can synchronize lighting computers, mixing desk automations, audio players, video players, all at the same time perfectly following the LTC via simple audio cables.

In an era where computer would only record MIDI and no audio, you had to buy a synchronizer hardware, such as a MOTU MTP, or an Opcode 8Port/SE, there were many… and some were very expensive. But now that all computers have audio, the synchronizer unit can be a software like GSi SMPTE Tool that sends and receives the LTC signal using the computer’s audio interface.

For the internal MIDI connection between SMPTE Tool and a DAW sofware, you can use something like loopMIDI on Windows, or if you own a multi-port MIDI interface like our GSi 5×5, you can send the MTC out from SMPTE Tool to a port, and use a short MIDI cable to connect that output port back to the interface on one of its MIDI input ports, that will be used by the DAW to receive the MTC information. Under macOS you can use the Audio Midi Setup and open the Midi Studio to configure the IAC Driver.

GSi SMPTE Tool is available to PC and Mac users (VST2, VST3 and AU).

For more information on GSI SMPTE Tool, click here:

NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.

Tags: au, desktop music production, desktop plugin, free, macOS, plugin, recording, smpte, tape, time code, vst2, vst3, windows

More Similar Posts

Recent Posts