Alexy Madzharov has reduced the price of a couple of apps for a limited time.
- lfoch – from $3.99 to $1.99
- broohahaizer – from $4.99 to $2.99
- isxynth – from $7.99 to $5.99
- ddtctmcc – from $5.99 to $3.99
lfoch
lfoch is an experimental LFO generator that can create “chase”-like effect with multiple outputs from a single complex waveform
- 2 LFO generators with phase modulation / ring modulation:
- Each LFO generators contains 2 suboscillators; one suboscillator modulates phase of another
- For each suboscillator you can set waveform rate, waveform type (with smooth morph between sine, triangle, sawtooth and square waveforms), nonlinear curve (for overdrive-like effect) and minimum/maximum range
- The result waveform is a multiplication of two generated LFO waveforms
- You can use 1..16 points from this waveform to output as MIDI control change values
- You can toggle the “playback” (phase change) of each generator with I/II buttons
- You can randomise parameter values with “dice” buttons
- App has two modes for live usage
- ‘perform’ mode has larger waveform view and some selected sliders (if any)
- ‘edit’ mode contains all controls on one screen
- Each generator can be synchronized to tempo. In this mode the “speed” value runs from 4 quarter forward to 4 quarter backwards speed, the fastest value in this mode is 1/32
- When running inside AUv3 host the app uses host’s transport.
- “free mode” setting allows you not to follow the host transport
broohahaizer
broohahaizer is an experimental noise machine AUv3 effect and standalone app.
- two sound sources, “synth” and “modulator” with various noise & tone making settings.
- the sound of these two sources is passed to the ring modulator and then goes to aswitchable “filter” unit
- the app works as an audio effect and the input goes to both “synth” and “modulator” sections
- when modulator is inactive it passes audio input (if available)
- all XY control pads have sustain switches
- all plugin parameters can be automated in AUv3 host and can be controlled / recorded
- [hold / loop] switch: enables gesture recording / playback / display
isxynth
isxysnth is spectral cross synthesis / morphing plugin.
It gets two input signals, splits each one into 2 parts containing noise and tone components and then allows morphing between all these elements. Freeze control allows spectral blurring-like effect for both input signals, two 3 second delay lines allow selection of different signal in time and also provide “freeze” effect.
You can process left and right channels on stereo source or use this effect as multi-input AUv3 – in that case it will use 2 stereo inputs. Standalone mode currently works only in “mono” mode.
lfoch
lfoch is an experimental LFO generator that can create “chase”-like effect with multiple outputs from a single complex waveform.
- 2 LFO generators with phase modulation / ring modulation:
- Each LFO generators contains 2 suboscillators; one suboscillator modulates phase of another
- For each suboscillator you can set waveform rate, waveform type (with smooth morph between sine, triangle, sawtooth and square waveforms), nonlinear curve (for overdrive-like effect) and minimum/maximum range
- The result waveform is a multiplication of two generated LFO waveforms
- You can use 1..16 points from this waveform to output as MIDI control change values
- You can toggle the “playback” (phase change) of each generator with I/II buttons
- You can randomise parameter values with “dice” buttons
- App has two modes for live usage
- ‘perform’ mode has larger waveform view and some selected sliders (if any)
- ‘edit’ mode contains all controls on one screen
- Each generator can be synchronized to tempo. In this mode the “speed” value runs from 4 quarter forward to 4 quarter backwards speed, the fastest value in this mode is 1/32
- When running inside AUv3 host the app uses host’s transport.
- “free mode” setting allows you not to follow the host transport
ddtctmcc
ddtctmcc (2D Touch Control To MIDI Control Change) is a touch control app that is designed to work with touch gestures and output MIDI Control Change messages.
This app is available as standalone version that can run in background and as an AUv3.
Features include:
- 2D Touch Area where you can set 3 MIDI values (X, Y and Touch On / Off) that will be sent as MIDI CC messages
- Two gesture recording modes: “Loop” and “Once”:
- In “Loop” mode the gesture is immediately repeated infinitely. You can restart it and change the direction of gesture loop
- In “Once” mode the gesture is recorded silently and only played back later when “trigger” or “+pause” buttons are pressed.
- Scene support. You can store all settings in a “scene” and switch between them. There is an option to set a transition time between scenes to morph loops.
- Extended timing support. Start/stop and speed of the loop can also be recorded and played back. The recorded gesture loop can follow the host tempo when running in plugin mode.
- Layers. Each instance of the app supports multiple output settings; scene switch is synchronised across all layers.
For more information on the apps, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
