Softube have released Clipper and Widener, available as a 2 for 1 offer, €79.00, (€158.00 if the two products are purchased individually). The offer ends March 31st.
Two brand new top-end dynamic processing plugins from the music technology giants at Softube, bundled together for a limited time only?
Clipper
Clipper is a music producer’s ace in the hole for giving finished tracks the final push needed to match loudness expectations in the mixing as well as the mastering process. Softube designed Clipper with this in mind, but true to form, they also added some extra features to this dual-stage clipper to empower you to go beyond that and make creative decisions about the sound and vibe of the clipping. With the dual clipping stages RMS and Peak, an analog color option, and an optimized soft knee function, Clipper is at once analytical and vibey.
The function of a clipper is to immediately limit peaks without the effects that come from a limiter or a compressor, like pumping or decreasing level over time. It’s useful when you have transients that would otherwise make your limiter act to decrease the overall loudness of your track. Clipper lets you manage those peaks while giving you the option to raise the level of your song. You may also find the sound of Clipper helpful to excite single tracks, such as synths.
Want to change the tonality of an 808 or a drum bus? You’re gonna wanna grab the Analog Color controls for that (plus, tweak the Headroom and set the Low and High Frequencies to home in on a specific frequency area you want to distort). That’s because the Analog Color controls let you increase the amount of even-order harmonics (the sweet ones that sound good) generated by the RMS stage.
Softube had many discussions regarding the name of this control because “analog color” sounds a bit, well … cheesy. At first, it was called “asymmetry,” but that didn’t imply anything about its sound, and it felt too technical a term. They tried a lot of different names but came back to “analog color” because that’s how you experience the sound. No, it’s not based on analog circuits or anything like that. But it does share the same spice: a pinch of even-order harmonics.
When it comes to creating equipment that enhances workflow and offers supreme sound quality, Softube’s reputation is rock solid and illustriously long. Their partnerships with premium brands like Tube-Tech, Solid State Logic, Chandler Limited, Weiss Engineering, and Trident have spanned decades.
Clipper was built on this legacy of creativity, passion, and obsession with the details. Because to create tools that innovate and elevate, you have to have heart, soul, and Rock & Roll Science.
Widener
Widener lets you create a stereo signal from a mono track or widen an existing stereo track with five unique widening algorithms. But why use a spatial widener anyway?
Opinions may vary on the risks of using spatial wideners, but the dirty little secret is this: many producers, and even mastering engineers, use them as an easy, effective way to make their track stand out. Caution must be used, of course, to avoid ruining your sound with unwanted artifacts. If you do, you have an amazingly effective tool to produce an immersive listening experience. Nothing ventured, nothing gained. Wade into the wider world with Widener.
Widener is effective on both mono and stereo sources. Turn mono into stereo to make your sound cut through the mix. Or use it to expand your mix as an alternative to other effects that might clutter the sound, like reverb or delay. Do this with the certainty that your sound will stay mono-compatible when using the Frequency Spread or Classic algorithm. In stereo, you can carefully widen the sound to enhance the three-dimensional space of your mix and create a sense of depth or you can make it narrower to bring focus to the mix. Widener does not only widen a mix, its crossfeed algorithms can also be used to create a more natural and cohesive sound image during the mastering phase.
Each mix is distinctive and comes with diverse challenges and necessities. Using stereo width to enhance your mix might produce artifacts you’ll want to consider. That’s why Softube included no less than five different algorithms: Classic, Frequency Spread, Rotation, Ambience, and Reflections. Each algorithm has a unique strength, which allows you to find the sweet spot for your stereo image and minimize those unwanted artifacts.
In short, the different algorithms use phase shifting, Mid/Side processing, or reverberation techniques to accomplish their sound. The goniometer and correlation meter provide real- time information about the stereo width and allow you to avoid pitfalls by confirming what you hear. Which empowers you to make the right choices for your mix.
Tip! Want to learn to identify the artifacts from, for example, the Classic algorithm? Listen to solely the left or right channel and slowly move the Size parameter. By listening to only one channel, your ears aren’t so easily fooled by the stereo-izing trickery. Moving the Size parameter shifts the comb filters around, letting your ears home in on them.
When it comes to creating equipment that enhances workflow and offers supreme sound quality, Softube’s reputation is rock solid and illustriously long. Their partnerships with premium brands like Tube-Tech, Solid State Logic, Chandler Limited, Weiss Engineering, and Trident have spanned decades.
Widener was built on this legacy of creativity, passion, and obsession with the details. That’s because, to create tools that innovate and elevate, you have to have heart, soul, and Rock & Roll Science.
Clipper and Widener are available to PC and Mac users (VST2, VST3, AU and AAX) and requires an iLok account.
For more information on Clipper & Widener and to compare prices, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
