Here are this weekend’s deals from 4Pockets. The deals end June 10th.
- RingsFX – $12.99 to $8.99
- Surface Builder – $14.99 to $12.99
- Progressions – $12.99 to $8.99
- Time Machine – 9.99 to $5.99
- Copperhead – $14.99 to $9.99
RingsFX
RingsFX emulates vibrations of structures simulated by 3 different synthesis techniques that can be plucked or process external signals: Modal Synthesis, Sympathetic Strings, and Inharmonic Strings. Traditionally, Rings was only monophonic but used a unique approach to polyphony that allowed the previous note to ‘ring’ out and decay while a new note was played. Rings FX provides these same modes (Mono, Duo, and Quad), but expands it with a true Polyphonic mode. RingsFX also expands the capabilities of the original engine by adding support for velocity sensitivity and MIDI MPE mode.
The new polyphonic mode allows RingsFX to play up to 12 notes of true polyphony, depending on the settings. Doing so requires RingsFX to use multiple Rings resonators, but the more true polyphony you use, the more processing power it requires. Running in the traditional Monophonic, Duophonic, or Quadrophonic modes may be preferred in order to keep CPU usage under control.
RingsFX has 7 modes in total, by combining the 3 basic modes with additional properties such as chords or specially tuned reverbs. The original hardware also had a secret ‘Easter Egg’ mode, which in RingsFX is simply calling ‘Synthesizer’ mode, rumoured to be based on one of the early Korg synthesis methods. This mode supported a number of mutable effects which now work on in all resonator modes.
RingsFX also has a Mod-Matrix which allows you to combine the built-in LFOs and FEGs to great effect by manipulating parameters and mutable effects in realtime.
Finally, RingsFX can be loaded as an AUv3 effect plugin. Set the Exciter Source to ‘INPUT’, and you can pass any audio through RingsFX and use this audio as an external exciter. For example, it can be used to great affect on a drum beat to create some crazy rhythms. Use the Output Mix to combine the original audio with the synthesised resonator output to create some stunning effects.
Surface Builder
Surface Builder is a tool for creating control surfaces that send MIDI data to one or more audio components in order to simplify remote control tasks. You start by creating a surface of a given size, adding buttons, knobs, faders, etc. to the surface and configuring them to generate the required MIDI output. Surface Builder allows you to send note on/off, controller change and program change values as well as being able to emulate modulation wheel and pitch bend data. Buttons can also be configured to send bulk MIDI data using a single key press. You can build surfaces that span multiple scenes and link between them for large complex interfaces.
Incoming MIDI data can also be used to control or trigger elements of the interface, giving a bi-directional stream of MIDI data. Surface Builder can be added as a pure MIDI plugin which allows processing of MIDI only, or as an instrument plugin, allowing you to process audio passing through it. You can even load it as an intrument and configure a surface to start and stop audio clips either manually or remotely.
Surface Builder was designed to be used as an AUv3 plugin within your favourite DAW, but it can also be used in standalone to send MIDI directly to MIDI hardware using direct access to their MIDI ports.
Many different object types are supported including buttons, switches, lights, rotary knobs, faders, sliders, XY-Pad, keyboards, as well as text, image and box objects. Each object has many different styles and colours, so no two surfaces look the same.
Drag and drop an audio file onto a button and that button becomes a clip player. Attach rotary knobs to control the clips volume and pan. Throw on top of that a LP/HP filter knob and you are cooking on gas. Drop PNG transparent image icons on buttons to customise the look and feel.
A button can record and playback bulk MIDI commands, on both button press and release. So pressing a button could send the notes of a chord when pressed, and appropriate note offs on release.
A surface can consist of up to 6 scenes for really complex designs. Buttons and switches can be used to switch scenes and also to show and hide other objects to make better use of screen space. Once your surface is complete switch to presentation mode to hide all the toolbars. Each surface can be saved with compressed audio and images all in a single surface file.
Progressions
Progressions is an AUv3 MIDI plugin for your favourite DAW. It can be used to generate a unique set of chords that are unrelated to traditional scales, which become predictable and repetative over time. Instead, Progressions uses a unique way of mathermaically generating a series of related chords using only a root note and mode (major or minor). Chord sequences are limited by the selected complexity and freedom levels, which mimic the way traditional composers of old would wander away from tonality and back again.
The complexity level start off at Basic, which uses only the most common chords (I, IV, V and relative minor ii, iii, and vi triads). As you progress through the levels, you can add parallel majors and minors, sus and dom chords etc. At level 3 we start to introduce 6th and 7th chords, and then 9ths chords, all the way to 11ths, 13ths, Quartals and all their variations.
The freedom level allows us to specify how far to drift away from tonality (the root), even allowing you to create never ending randomized soundscapes.
Progressions allows you to quickly randomize a toolbox of chords, that can be played in a variety of modes (block chords, arpeggiated, or strummed). These can be synced to a host application, triggered remotely or pieced together into a song.
Song mode allow you to change play modes on the fly as well as being able to control many features of the app in real time.
Progressions supports open and closed chords with selectable voicings. It has an intelligent algorithm that attempts to align top notes of chords, add additional bass, and open chord padding to give equal weight to chords with only 3 notes. You can even play with rootless voicings.
The Humanize section allows you to control chord and note timings, as well as set velocity variations to ensure things don’t get too robitic.
Progressions also features an integrated arpeggiator and strummming pattern editor. You can load up to 6 arp and 6 strum patterns at the same time and seemlessly switch between them manually, remotely, or using song mode.
If you run multiple instances, Progressions allows you to sync your chord pads, song chain, arpeggiator / strum patterns between instances.
Progressions can be loaded as a MIDI plugin or as an Instrument for those programs that don’t support MIDI plugins (such as GB). Additionally when loaded as an instrument, you can use either internal sounds (soundfonts) or send MIDI directly to other MIDI instruments.
Time Machine
Time Machine is a plugin that allows you to go back to the days of vinyl and tube amplification.
If you still long for those nostalgic days of warped records, worn needles, static laden, crackle ridden vinyl then this plugin is what you’ve been waiting for. It simulates the sound of early gramophones, radiograms, record players, through to late 80’s turntables. You can either select an ‘Age’ or tweak individual settings to add warp, dust, scratches and good old fashion hiss to your recordings.
The tube emulation mimics the old valve driven amplification which can be overdriven to add a nice warm
tonal quality to your sound. It even allows you to add additional harmonics using the saturation knob to mimic the effect of tube amplification. It’s a subtle but effective way of adding character and punch to thin sounds without changing pushing them in to the realms of distortion.
When you turn on the Vinyl emulation you can choose to emulate the needle hitting the record, while the power button smoothly fades the effect in and out.
We’ve all heard those great intros that sound like a blast from the past before diving into an aural onslaught. Well this might just be the tool to help lull your audience into that false sense of security!
This is one of those playful fun effects designed to add a bit of spice into your songs and inspire ideas.
Copperhead
Copperhead is an AUv3 digital subtractive synthesizer plugin which draws its influence from the vintage synthesizers of the early 80’s. Only now we have multi-note polyphony, a build in arpeggiator, and a host of integrated audio effects. Copperhead features a custom String Machine, the ability to design your own custom waveforms, as well as supporting oscillator sync and various cross modulation effects. Cross modulation is a type of FM synthesis which can be used to morph simplistic waveforms into something far more aggressive and interesting.
At the heart of Copperhead are its two oscillators, which support all your traditional waveforms (SINE,SQR,SAW,TRI), as well as SuperSaw, Trapezium, and other user definable types. The app features pulse width modulation and supersaw, as well as a customisable string engine and the ability to create your own oscillator types.
The Voltage Controller Filter supports the usual LP, HP, BP and Notch filters in series or parallel configuration, as well as a couple of unusual ones like Formant which allows you to sweep your cutoff to create interesting vowel sounds.
Copperhead also features twin LFO’s with random and one shot functionality. It also supports Cross, Ring and FM modulators, in addition to low and high shelf filters.
One of the great features is the integrated audio gate, which allows you to generate stuttering audio right out of the box. Combined with effects such as Chorus, Overdrive, Delay, Reverb and Auto Pan / Tremelo, and the ability to specify effect order, you have a lot of control over your sound.
If that wasn’t enough, we also include a 32 step sequencer, with various mono and poly modes with direct control control of various synth elements.
4Pockets have a built in Preset Manager which groups presets into banks and groups, which supports drag and drop for easy import/export of presets. You can also access your favourites from a special popup menu, or via the built in quick search facility. Copperhead now ships with over 550 presets which cover just about every instrument category you would ever need.
For more information on these and other 4Pockets apps, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
