Alexy Nadzharov has reduced the price of various apps for a limited time.
- takeamidi – $1.99 to $0.99
- soundfruuze – $6.99 to $4.99
- broohahaizer – $4.99 to $2.99
- mididelay – $4.99 to $2.99
- resonatedo – $3.99 to $1.99
- sinusedo – $3.99 to $1.99
takeamidi
takeamidi is a MIDI monitoring tool / MIDI filter / live sampler that allows you to quickly grab recent data as a MIDI file. The application’s MIDI buffer contains recent 10 seconds / 1 minute / 10 minutes of MIDI input; The recording can be paused and cleared with appropriate buttons. You can export the contents of the buffer by dragging a “file” icon in the lower left corner of the app window. Log window shows data of the selected time range. You can use this app as a MIDI filter. It supports Channel, System Common, Realtime and System Exclusive messages to be displayed and / or filtered.
soundfruuze
soundfruuze’ is an exprerimental live sampler / looper / granular and FFT scrub effect. It records live the recent 10 seconds of audio and allows you to manipulate it with special controls. The interface is divided into five “lanes”, sound is produced by touching the lanes. Each lane can be set up to use different effect and has various control parameters mapped to the touch position.
broohahaizer
broohahaizer is an experimental noise machine AUv3 effect and standalone app.
- two sound sources, “synth” and “modulator” with various noise & tone making settings.
- the sound of these two sources is passed to the ring modulator and then goes to a switchable “filter” unit
- the app works as an audio effect and the input goes to both “synth” and “modulator” sections
- when modulator is inactive it passes audio input (if available)
- all XY control pads have sustain switches
- all plugin parameters can be automated in AUv3 host and can be controlled / recorded
- [hold / loop] switch: enables gesture recording / playback / display
mididelay
mididelay is an implementation of traditional delay effect adapted for MIDI data.
- 8 independent delay lines with feedback
- Each delay line can process MIDI notes, control change, aftertouch, polyphonic key pressure and pitch bend messages.
- For the feedback, the “feedback level” is applied to the messages; note messages change velocity and all other messages can be mixed with previous values using one of three modes (average, minimum and maximum value)
- It’s possible to organise delay lines in different possible ‘algorithms’, sequentially and/or in parallel
- There are three effects available inside delay’s feedback chain: scale quantise, pitch and velocity value operations randomisation
- Each ‘preset’ contains 3 independent scenes marked “A”, “B” and “C”, it’s possible to cross-fade between them and adjust overall amount of the effect with 2D pad.
- Simple mode : only one delay with scenes morphing.
resonatedo
It contains two sets of resonators controlled by separate keyboards. Each resonator has independent pitch (set by EDO division value of the keyboard), volume and modulation. Each resonator is a delay with feedback that contains lowpass + allpass and bandpass filters. Each set has a common “color” parameter that changes balance between these filter sets in each single resonator. The “mix” control allows crossfade from dry to fully processed signal. resonatedo supports MIDI input from external sources to control each keyboard independently.
sinusedo
sinusedo supports various equal division of the Octave (EDO) scales, each octave can be divided in n steps, from 4 to 72. Each voice is a sine wave with separate ring modulator.
For more information these and other Alexy Nadzharov apps, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
