Joshua David Aquino has updated ToneRig, available as a FREE download with an optional in-app purchase that unlocks the Pro version.
What’s new in version 1.3.7:
- New TONE300O browser with Audition, built into ToneRig – Browsing captures no longer means a web view. The new native catalog covers Latest, Trending, Favorites and My Tones, with search and filters. Audition any capture or cabinet IR straight through your current rig before you import it: close the preview and the block you were on comes right back, Import a single model or a full capture pack.
- NAM input calibration and output modes – Set the analog level your interface treats as 0 dBFS once, and any capture carrying its own input reference is matched to it showing both the reference and the trim being applied. Output offers Raw, Normalized and Calibrated. The capture itself is never altered, only the signal around it.
- Two new modulation pedals –
- VANE Phaser: 4. 6. 8 and 12 stage modes with Rate, Depth, Center, Feedback, Mix and stereo Width.
- RAIL Flanger: an interactive delay rail with Rate, Regeneration, Mix and stereo Width. Both ship with factory and user presets, MIDI Learn, live visualisations, and identical standalone and AUv3 versions.
- Hosted plug-ins now open in a floating, draggable, resizable window over your board, with the plug-in’s bypass switch in its title bar. Tapping a plug-in opens its interface immediately: the extra “Open Plug- in” step is gone on iPhone and iPad too.
- MIDI – A new ToneRia MIDI identity lets hosts such as Loopy Pro route MIDI to a loaded instance. and a stable ToneRig MIDI Input destination accepts Note, CC and Program Change directly. Every general MIDI action is now an AUv3 parameter, so hosts can automate presets, banks, Snaps, bypass, tap tempo, metronome and looper even with the editor closed. New exact-value actions for Tuner On/Off and Metronome Start/Stop, plus MIDI Learn for metronome volume.
- An optional tip jar – Under Settings > Support. Tips unlock nothing and every feature behaves dentically whether or not you leave one.
- Also in this release –
- Capture names now read as gear type, tone, model and creator. and TONE3000 IRs carry the same artwork and attribution as captures.
- Signing out of TONE3000 now clears the site session too.
- The tuner picks up quiet instruments more reliably, and the AUv3 tuner matches the standalone one
- General bug fixes and housekeeping
ToneRig turns your iPhone or iPad into a responsive amp, cab, and pedalboard rig for guitar and bass. Connect a USB audio interface, load a tone, and play. No laptop required.
Built for playing, not just previewing. ToneRig runs at your audio interface’s hardware sample rate with a small buffer, keeping your sound tight and responsive.
What you get FREE
- Full-quality, low-latency monitoring for guitar and bass
- Run FULL A2 Neural Amp Modeler (.nam) captures
- WAV impulse responses support
- A complete pedalboard: amp captures, cabinet IRs, parametric EQ, reverbs (including convolution, modulated, and shimmer), digital, analog, tape and reverse delays, chorus, tremolo, octaver, whammy, drop tuning, wah, auto filter, auto swell, FET and opto compression, noise gate, and volume
- ALON Bass Synth: a four-voice analog-style bass synthesizer with a triggered resonant filter sweep, ten factory presets, and savable user presets
- A 60-second stereo Looper with record, overdub, undo, play once, and reverse
- 10 free TONE3000 downloads to get you started
- A flexible, reorderable signal chain
- Savable user presets on every effect, including the NAM amp and Cab IR blocks, which recall their capture or IR file with the settings
- Type an exact value into any knob by tapping its read-out
- Built-in tuner, input and output meters, and a real-time latency estimate
- Digital metronome with tap tempo, adjustable time signature, accented downbeats, and tempo-synced effects
ToneRig Pro – one-time unlock:
- 128 presets across 16 banks
- Eight Snaps per preset for instant in-song sound changes, recallable by MIDI or from your host
- Build parallel signal chains with Y split, A/B balance, and crossover routing
- Control lane level, pan, and polarity
- Map MIDI footswitches, notes, and control changes using MIDI Learn
- Unlimited TONE3000 downloads
- Host third-party AUv3 effects inside your signal chain
- Use ToneRig as an AUv3 effect in GarageBand, Logic Pro, AUM, Loopy Pro, and other compatible hosts, with full preset and Snap recall saved in your session
- Back up presets, captures, and IRs to your private iCloud storage and restore them on any device
How it works:
- Connect a class-compliant USB audio interface and plug in your instrument.
- Connect headphones or monitors to the interface.
- Load your own neural captures, import cabinet IRs, or find tones on TONE3000.
- Add effects, reorder blocks, adjust controls, and build your sound.
Unlock ToneRig Pro with a single purchase. No subscription.
ToneRig is an independent product and is not affiliated with or endorsed by the Neural Amp Modeler project or TONE3000. Those names are used only to describe file and service compatibility.
For more information on ToneRig, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
