Central Processing Unit have updated CPU Micron, available for $14.99.
What’s new in version 1.1.3:
- CPU Micron is now an Audio Unit plug-in as well as an app
- Play CPU Micron inside GarageBand and other apps that host Audio Unit instruments. Set SEQ to Sync and the sequencer starts, stops and keeps tempo with your song. Your sound, sequence and settings are saved with the song.
- One library for the app and the plug-in: a preset or sequence saved in one appears in the other. Presets you have already saved move across the first time you open the app.
- The library is no longer listed in the Files app. Use Export and Import on the FILE menu to move presets and sequences in and out, and Show exports in Files to find what you’ve exported.
- Menus respond properly to touch, including FILE . ‣ Randomiser ‣ Key and Scale.
- A note held while POWER is switched off no longer comes back stuck on, and controller knobs moved while POWER is off now take effect.
- Knobs and faders move more smoothly.
- The manual has a new On the iPad chapter.
A schematic-accurate 1983 analogue bass voice and step sequencer for iPad. Built from the circuit and it reads and writes the hardware’s own tapes.
CPU Micron is a schematic-accurate recreation of the analogue synthesiser voice Roland built into the MC- 202 in 1983, made for iPad by Central Processing Unit.
Rather than approximating the sound by ear, its DSP is built from the original circuit diagram and the real component values: the CEM3340 oscillator, the IR3109 transconductance filter, the discrete- transistor envelope and the op-amp LFO. Every figure comes from the schematic, from a measurement of a working hardware unit, or from the manufacturer’s own service-manual specifications – and where a figure could be both calculated and measured, the two agree.
The voice
- • Oscillator with simultaneous saw and pulse, variable pulse width and PWM, and a 2′ to 16′ footage switch
- Sub oscillator one and two octaves down
- Four-pole low-pass filter that self-oscillates into a clean sine at the top of the control, reproduced from the real feedback path
- Discrete ADSR envelope on its real RC time constants, and a triangle LFO with rate and fade-in delay
- TUNE, PORTAMENTO, ACCENT, VOLUME and TEMPO, on a hardware-exact panel
The sequencer
Reconstructed from the original owner’s manual rather than replaced with a step grid: two channels, gate time as a fraction of step time, bars stored as data, and the machine’s own key map. A sequence can be written to an audio file and played into the hardware’s tape input, or read back from tapes the machine itself recorded – notes, accents, glides, ties and bar lines intact.
Everything 1983 lacked
- Patch and sequence memory, with factory banks of basses, leads and effects
- Presets and sequences kept in the Files app, so they can be backed up, shared and moved between devices
- Two randomisers, one for patches and one for sequences, that write something worth keeping
- MIDI CC on every panel control
- Five panel finishes
- The full manual, built in
For more information on CPU Micron, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
