Desktop SoftwareJust In

DiBiQuadro Audio Release Kepler3P

DiBiQuadro Audio have released Kepler3P, available at the intro price of €69.00, increasing to €119.00 after the promotion.

Kepler3P is the software emulation of a legendary boutique three-channel preamp, the kind of rig that defined high-end rock and metal tone for a generation. Paired with a power section sampled from a 100-watt EL34 head in its Voice 2 mode – a purple, heavyweight unit regarded by many as the finest power amp ever made – it delivers the full weight and authority of a real tube amp pushed hard.

Three channels cover the whole spectrum: sparkling, dimensional cleans; a vintage-flavored crunch with that unmistakable British bite; and a lead channel with singing sustain and saturated, creamy gain. Each is voiced to stay articulate and tight, with a low end that never turns flabby and highs that cut without becoming harsh.

The EL34 output stage adds what no preamp alone can: the midrange growl, the dynamic response and the pick-attack sensitivity of a big amp working at full tilt. Roll back your guitar’s volume and it cleans up; dig in and it pushes back.

Loud when you need it, refined when you want it, and beautiful in every channel. Plug in, pick a channel, and play.

Non-Plus-Ultra Preamp represents the perfect approach to circuit modeling. Kepler3P preamp features a built-from-scratch 64-bit engine which is based on general purpose hi-quality algorithms and the most recent non-linear models. Special care has been taken in defining the Non-Linear Solver to ensure maximum quality and realism, without losing details in favor of performances (Double-Precision Non-Linear Computing).

Our Non-Plus-Ultra reproductions bring a completely new philosophy to the table: being able to shape your tone by giving total access to the circuit components. Managing each gain stage level, shaping the tone-stacks or modifying the tubes characteristics: there is virtually no limit to what you can achieve with our plugins!

The HEADROOM section lets you shape the behavior of the power stage, from clean headroom to full saturation.

You can define how and when the power amp starts to distort, choose different clipping characters, and adjust the interaction between pre and post gain stages.

Before describing our solution, let’s talk about what everyone else does: the commonly spread approach of the “single IR” to reproduce a cabinet is nothing more than a digital clean equalizer. Which means: non-linearities are not reproduced at all. Competitors generally model power amps to introduce harmonic distortion, but they totally omit the non-linearities coming from the speaker, the microphone and the mic preamp. While these can be considered somehow negligible for some types of high wattage speakers when dealing high gain sounds, it is essential when the speaker breaks up. Furthermore, sometimes solid state power amps are used to sample cabinet, speakers and mikes, but these power amps, despite being considered “neutral”, have their own “footprints” due to the different impedance, so the interaction with the speaker is noticeably different when compared to a classic tube power-amp.

Another limit of many well-known amp simulations is the complete absence of power amp clipping.

As DiBiQuadro we implemented our own version of Non-Linear Convolution (NLC) to reproduce all the final stages of a miked amplifier. We use to call Pwr/Cab a chain made of:

  • A tube power amp
  • A cabinet/speaker
  • A microphone
  • A high-end studio preamp

This chain is sampled as a unique block to preserve the correct interaction between the specific power amp and the speakers. Our 64-bit (double precision) NLC engine allows up to 40 kernels (harmonics). In addition, a complete set of parameters gives the full control over the power amp headroom, the type of clipping and the interaction of the negative feedback with the Depth and Presence knobs.

The input signal can be processed by activating a shaper before the preamp. This block allows to select one of the following:

  • A Low Cut
  • A Mid Boost
  • A Graphic Equalizer
  • A Parametric Equalizer
  • A Compressor
  • An Overdrive circuit
  • A Distortion circuit

All DiBiQuadro amp simulations include the following effects, fully tweakable at component level:

  • A beautifully voiced Wah effect. The frequency parameter can also be automated via your DAW.
  • An Overdrive with two modes: TS (symmetric clipping) and SD (asymmetric clipping).
  • A Distortion with three modes: MDP (Distortion+ style), and 250/308 (Classic Preamp) modes.

Both Overdrive and Distortion allow to select the type of diode:

  • Silicon
  • Germanium

The diode characteristic and topology (only positive, only negative, one against one) can also be modified.

Every knob, button and state of the Preamp and PwrCab sections can be automated in your DAW. This provides a new level of integration of DiBiQuadro plugins with the time-based events of your project.

Kepler3P is available PC and Mac users (VST3, AU and AAX).

For more information on Kepler3P, click here: 

NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.

Tags: aax, amp sim, amplifier, au, desktop music production, desktop plugin, emulation, FX, guitar amp, plugin, vst3

More Similar Posts

Recent Posts