Here’s the latest round of price drops from 4Pockets.
- Euclidean Sequencer – $14.99 to $6.99
- FontStack – $14.99 to $7.99
- SlowMoFX – $9.99 to $5.99
- Chameleon Sampler – $12.99 to $6.99
Euclidean Sequencer
Euclidean Sequencer is an alternative incarnation of the classic step sequencer that has become very popular in the modular realm. It is based on Euclidean rhythms developed by computer scientist Godfried Toussaint in 2004. Euclidean rhythms have their roots in Greek mathematician Euclid’s algorithm, which involves using the greatest common divisor of two numbers to place hits in a sequence as evenly as possible across a set timing divisions.
In practice this is actually simpler than you might think, and Euclidean Sequencer is a great way to auto generate complex musical sequences with no prior knowledge of how it actually works.
Euclidean Sequencer is an AUv3 plugin that can be loaded inside any popular host application that has flexible MIDI routing.
You can define up to 4 Euclidean rhythm parts, each part is referred to as a band. The bands are labelled A-D and colour coded RED, ORANGE, GREEN and CYAN. Together these 4 bands create a pattern, and you can create up to 16 separate patterns per song patch.
Since each band can specify its own note sequence and output MIDI channel, you can create some quite sophisticated rhythms patterns, driving 4 separate instruments at once. Even better you can seamlessly switch patterns to create even longer evolving sequences. Patterns follow a specified key, scale, or defined chord.
You can even use MIDI input to automatically make note sequences conform to the currently playing chords.
Euclidean Sequencer now supports 4 different modes, traditional Euclidean, PolyRhythm, PolyMeter and PolyTempo. We have many great ways to automatically generate complex rhythms making it an invaluable tool for experimental music creation.
FontStack
FontStack is a ‘fontastic’ AUv3 plugin for iOS which can be loaded into your favourite DAW allowing you to utilise all those wonderful and nostalgic SF2 SoundFonts you’ve collected over the years.
The SoundFont standard was created back in the early 90s and made famous by the SoundBlaster series of sound cards. With the introduction of the Amiga, it spawned a host of musical creation tools called Trackers, which allowed the Amiga to load these SoundFonts and create sophisticated musical scores of 4 or 8 tracks. These days we don’t use this standard so much, but there is a wealth of free SF2 files available on the internet just waiting to be loaded into FontStack.
A SoundFont comprises a file with an .sf2 file extension. This file contains a set of samples, instruments, and presets. FontStack enables you to load one or more SoundFonts into its 4 layers, and use them in lots of creative ways.
You can stack layers to create a rich combination of multiple tones, or assign each layer its own key range on the keyboard to create virtual splits, or a mixture of the two. Each layer can also be assigned its own MIDI channel for true OMNI mode.
One great feature of FontStack is its ability to cache all your SoundFonts and the instruments they contain. This allows quick searching for specific instrument types without the need to physically search SoundFonts to find them.
Another great feature is the ability to optionally link to a remote folder containing a global set of SoundFonts, so that they can be shared between apps. Both internal and external SoundFonts and their instruments will be cached, and searching is just as easy as it is using internal SoundFonts.
SlowMoFX
SlowMoFX is an AUv3 plugin that allows you to seemlessly mix incoming audio with a slowed down version in perfect sync with the current tempo. This allows you to obtain that sort after half speed effect that is used by many famous DJ’s around the world.
You can dropout the original audio completely to create dark downtempo atmospheric versions of a song and slowly and seemlessly return to the original mix. This is great for drums and percussive rythms. Lead instruments with sharp attacks when slowed down give those distinctive trap melodies and booming basses.
Simply press the POWER button to turn on the effect. It will smoothly transition to a mix of the original and a slow halftime version. Selecting the 4x option will slow down to quad time making the mood even darker, while the 1.5x can be used to generate triplets and syncopated beats.
The low and high pass filters can be used to determine how much of the input is effected, while the mix knob controls the depth of the effect.
The Glide button enables a smooth glide from the none effected pitch to the destination pitch for those slow down and speed up type effects. A ping pong mode also allows you to alternate between forwards and reverse play while the reverse mode creates long soothing syncapated textures.
SlowMoFX also sports a number of built in effects that can be enabled in order to create smooth transitions such as delay and reverb, while the EQ, drive, phaser, pan and pitch effects allow you to add flavour to the sound. If running under a DAW such as AUM that allows multiple output busses you can route the effected signal through your favourite external effects.
Chameleon Sampler
Chameleon is an AUv3 compatible sampler instrument plugin for your favourite DAW.
The program can run as a standalone app in order to record audio samples from the internal microphone or professional audio interface. It also supports incoming Inter-App Audio connections for sampling directly from other iOS applications, however it is primarily intended to be used as an AUv3 Instrument plugin for applications such as Cubasis, AUM, Auria, Meteor, Gargeband etc. The plugin can additionally be loaded as an AUv3 effect in order to record audio passing through it from other AUv3 Instrument sources, which makes it a very versatile and useful tool.
So what is a sampler? A sampler is a device that allows you to imitate other instruments with just a few short audio snippits. Although it comes with a library of presets it also allows you to create your own. You do this by recording multiple audio clips and mapping them to the notes on a MIDI keyboard and Chameleon does the rest using a sophisticated pitch shifting algorithm to fill in the blanks. Recorded samples can either be layered or mapped freely over a 7 octave range and saved as individual presets. Presets are then organised into custom categorised banks which can be exported and shared with others.
Just think, you can sample all your favourite synth sounds and carry them around on your iPhone/iPad without the inconvenience of lugging heavy gear around with you. Sample anything from musical instruments to vocal snippits, drum machines or ambient noises. The possibilities are endless.
Recording is incredible easy. Just create a New Patch and press record. Chameleon will wait for you to play a note before recording begins. Once recorded press the LEARN button and tap the note range on the virtual or MIDI keyboard to map the sample. Repeat this as many times as required, tweak the settings and save your patch. Additionally you can setup loop points with the ability to apply crossfade. If all that sounds too complicated, just press auto sample and let Chameleon do all the sampling for you.
Chameleon also has a quite sophisticated arpeggiator which allows you to create complex mixtures of notes and chords with glide, hold and re-triggering options.
On board reverb, digital delay and chorus effects are available to give your samples a more polished touch. We also include 4 touch pads for quickly dialing in on a sound or for easy effect automation. Configurable touch ADSR and modulation options are available too.
Chameleon can also import audio samples using iOS Files integration or you can make use of Copy / Paste to quickly drop one of more samples into a patch. You can also freely edit samples using the built in tools such as normalise, fade in, fade out, crop, clear options etc.
You can run Cameleon as a standalone app and map external MIDI keyboards (Bluetooth MIDI support also included) and perform audio sampling outside of your DAW. This is provided for convenience since you can’t record input when hosted as an AUv3 Instrument plugin.
Yes some DAW’s have built in samplers which only have the ability to playback libraries provided with the software. Chameleon allows you to built your own libraries of sounds and share them with others. There’s a budding rapper in you dying to get out and we have just the tool!
For more information onnthese and ither 4Pockets apps, click here:
NOTE: Some of the links you click on may be affiliated. Clicking and purchasing using these links helps support and fund The Beat Community. Thanks for your support.
